SIX THINGS MUST KNOW WHEN INSTALL LAMINATED GLASS WITH EVA FILM
By Peter Shin www.evafilms.com
(1)
GLASS Sealant for EVA LAMINATED GLASS
In the actual application, the safety laminated glass usually needs
sealant to join the seam. In practical, some kinds of glass sealant
may cause adverse reaction with the (Ethylene-vinyl acetate)EVA
interlayer film, including de-lamination, bubble or blackening around
the laminated glass; or some oil paints will also produce the
above-mentioned adverse reaction with Dry Melt adhesive EVA Interlayer
Film. Therefore, we suggest customers inquire and examine the quality
of the glass sealant before selection, and make sure that the sealant
ready to be used will not lead to adverse reaction to the laminated
glass before mass application. A recommended sealant is Toshiba
Neutral Climate-resistant Sealant", with No. 381. We shall not be
responsible for any adverse reaction or loss caused by the sealant
that has been misused.
(2)
CHECK EVA INTERLAYER FILM WHEN RECEIVE FROM TRANSPORTATION
When receiving EVA films from the transportation company, customers
must examine the outer package and check whether it's intact or
whether it's contaminated by rain or other pollutant source. If
contamination is found, customers should negotiate in time with the
transportation company, and also inform our sales at the same time. It
will be very difficult to ask for compensation from the transportation
company if the problem is found after the EVA films have been
accepted.
(3)
CHECK LABELS OF GLASS EVA FILM
The item name and number on the outer package of GLASS EVA FILM must
be checked before the package is opened.; only after they are
confirmed to be correct can the GLASS EVA films be used. And it's
suggested that the item's label is saved after the the GLASS EVA film
is used, {Want to learn more, please contact:(1)China Ethylene-vinyl
acetate EVA Interlayer Film Manufacturer for Safety Architectural
Laminated Glass.(2)China EVA Film for Smart Glass, Privacy Glass, LED
Glass etc.(3)China Solar EVA Film for Solar Panel Encapsulation.
(4)China Switchable Film for Privacy Glass, Smart Glass.=
cnc@cncnext.com / www.cncnext.com / benext77@gmail.com /
benext77@hotmail.com / eva@evafilms.com / www.evafilms.com }
so that if the GLASS EVA film is found to have some problems,
customers can provide this relevant information to the GLASS EVA FILM
manufacturer for check.
(4)
MINOR HOLES ON THE LAMINATION EVA FILM
A few minor holes on the LAMINATION EVA Films are created when the
film quality was examined, and they will not adversely affect the
normal application of the LAMINATION EVA films. But the LAMINATION EVA
films should not be used if the holes are big and numerous, or other
unwonted situation is found. For the problem, customers should contact
LAMINATION EVA FILM MANUFACTURER immediately. The manufacturers shall
not be liable for the loss due to the blind production.
(5)
TURN YELLOW OF Ethylene vinyl acetate (EVA) DUE TO LONG TIME STORAGE
Ethylene vinyl acetate (EVA) film's surface may turn to yellow or red
due to unsuitable storage or moisture, but the Ethylene vinyl acetate
(EVA) film can still be used if the situation is not severe. However,
under this situation, the Ethylene vinyl acetate (EVA) film can not be
used blindly, and it is suggested to check the quality through a test
of a small sample of Ethylene vinyl acetate (EVA) before mass
application. {All rights reserved by China Ethylene-vinyl acetate EVA
Interlayer Film Manufacturer for Safety Architectural Laminated Glass,
Smart Glass, Privacy Glass, LED Glass etc.(cnc@cncnext.com /
www.cncnext.com / benext77@gmail.com / benext77@hotmail.com)
(eva@evafilms.com / www.evafilms.com )}
Customers can also contact Ethylene vinyl acetate (EVA) manufacturer
and inquire solutions.
As to the Ethylene vinyl acetate (EVA) films that the manufacturer
agree to return, laminating factories need to pack the Ethylene vinyl
acetate (EVA) films in good situation before delivery, so as to
prevent damage or contamination during transportation. Customers shall
be responsible for the loss in return caused by the bad package of
Ethylene vinyl acetate (EVA).
(6)
DIFFERENT CHARACTERISTICS OF DIFFERENT MANUFACTUER OF EVA FILM
This " Application Instruction" is only related with the EVA FILM (CAN
REPLACE HOT MELT ADDHESIVE PVB INTERLAYER FILM) that produced by one
manufacturer of EVA FILM (CAN REPLACE HOT MELT ADDHESIVE PVB
INTERLAYER FILM), and can not be universally applied to other
manufacturer of EVA FILM (CAN REPLACE HOT MELT ADDHESIVE PVB
INTERLAYER FILM). Besides, the technique mentioned in this Instruction
is derived from actual practice, but has not obtained the verification
from any institution, so it can not be used as the conclusive basis.
It is only for customers' reference when laminating EVA FILM (CAN
REPLACE HOT MELT ADDHESIVE PVB INTERLAYER FILM), and customers can get
more applicable techniques through more practice or keep in touch with
manufacturer of EVA FILM (CAN REPLACE HOT MELT ADDHESIVE PVB
INTERLAYER FILM).
All rights reserved by:
China Ethylene-vinyl acetate EVA Interlayer Film Manufacturer for
Safety Architectural Laminated Glass.
China EVA Film for Smart Glass, Privacy Glass, LED Glass etc.
China Solar EVA Film for Solar Panel Encapsulation.
China Switchable Film for Privacy Glass, Smart Glass.
cnc@cncnext.com / www.cncnext.com / benext77@gmail.com /
benext77@hotmail.com / eva@evafilms.com / www.evafilms.com
