Tips of How to Use Green Tape
GREEN TAPE is to perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating and under vacuuming press (the GREEN TAPE is High temperature resistance).
If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, will the GREEN TAPE prevent the de-airing vacuuming? do we need to make some holes on the GREEN TAPE for vacuuming the air out?
It depends. If you don't make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don't need to make holes on the GREEN TAPE, so you can get cleaner result of the edges of the final laminated glass. But if you don't make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it's better you make some holes on the GREEN TAPE to help pre-laminated glass de-airing vacuuming.
Does CNC GREEN TPAE leave glues on the glass?
NO! No remains of CNC GREEN TAPE left on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃ with strong tear resistance.
What is the specifications of CNC GREEN TAPE?
25mm66M/roll
30mm66M/roll
35mm66M/roll
40mm66M/roll
50mm*66M/roll
CNC Glass Interlayer
www.cncglass.com www.c-n-c.com
cnc@cncglass.com benext77@gmail.com
Product 1]Super Clear EVA Film for safety laminated glass
Product 2]Milky White EVA Film for safety laminated glass
Product 3]Green Tape and Thermal Cleaning Cutter for EVA film safety laminated glass glazing
